`
Back to the newsroom
Certifier TÜV Nord hands over documents at Hamburg WindEnergy trade fair / Measurement campaign at prototype site successfully completed
ENERCON has received the type certificate for its E-138 EP3 E3 turbine type. The expert organisation TÜV Nord, as the appointed certifier, officially handed over the documents today (26 September) at the Hamburg WindEnergy trade fair.
As part of the measurement and validation campaign, the loads, power curve and sound power levels were successfully measured at the prototype site in Staphorst, Netherlands. On completion of the measurement programme, the prototype was handed over to the customer.
The E-138 EP3 E3 has a rotor diameter of 138 metres, a rated output of 4.26 MW and is available with different tower variants with hub heights of 81 to 160 metres. With a wind class IIA rating, it is currently suitable for weak to medium wind locations. Like all current ENERCON turbine types, the E-138 EP3 E3 is based on the E-nacelle concept with E-technology integrated into the nacelle.
‘We are delighted to have received the type certificate,’ says EP3 Product Manager Sascha Exner. ‘This is an important milestone in our product roadmap, which will soon be followed by further important steps. The E-138 EP3 E4, with which we will standardise the nacelles of the EP3 and EP5 platform, is already in development.’
This EP3 turbine type will then be fitted with the self-supporting nacelle covering that has already been introduced on the EP5 platform. Based on the successful prototype measurement and further developments, ENERCON will also offer an improved power curve for the E4, which will enable around 1.5 per cent more annual energy yield (AEP). In addition, a more robust version for typhoon requirements in Asian markets is under development, and there will be new steel towers for Europe with 111 metres and for Japan with 99 metres.
Deliveries of the E4 in Europe will start at the beginning of 2026.
ENERCON's current product portfolio will also be the focus of the company's presence at Hamburg WindEnergy (until 27 September).
Visit us at the international trade fair (Hall A4, Stand 244) to find out more about our range of products and services!
As a provider of integrated solutions for the connected Green Energy Ecosystem, ENERCON supports its customers in the realization of onshore wind energy projects. To fully unlock project potential, the company combines its high-performance, high-yield wind turbines with complementary solution components and services, enhancing customer benefits and the overall value of wind energy. The range of the solution portfolio, from which customers can select modules according to their requirements, extends from planning and installation to management and control, service and maintenance, and optimization of system performance during the operational phase.
As a pioneer in renewable energy with over 40 years of experience and a deep understanding of the demands of a changing energy system, ENERCON’s scope has always extended beyond mere wind turbines. With the mission ‘Energy for the World’, the company has been committed to sustainable energy generation from onshore wind since 1984. Thanks to its innovative turbine technology, high quality standards, and an installed total capacity of more than 65 gigawatts, ENERCON is among the world’s leading renewable energy companies.
With extensive expertise in the area of ‘holistic project development’, ‘connected operations’, and ‘smart optimization’, a dense service network, and a broad network of partners and service providers, ENERCON is a competent and reliable partner for its customers in all project phases. Headquartered in Aurich, Lower Saxony, the company employs around 13,000 people at administrative, sales, production, and service locations worldwide.
With new operation modes, operators of ENERCON E-175 EP5 E1 wind turbines can significantly increase their energy yields and revenues. Based on successful prototype measurements, ENERCON now offers these new ‘operation modes’ as optional product upgrades. Depending on site conditions and operating concepts, they can boost the annual energy production (AEP) by up to 5 percent.
In time for Husum Wind, ENERCON is providing an attractive end-to-end approach combining wind farm with battery energy storage system for the next phase of the German energy transition
As a provider of integrated solutions for the connected Green Energy Ecosystem, ENERCON supports its customers in the realisation of onshore wind energy projects. To fully unlock project potential, the company combines its high-performance, high-yield wind turbines with complementary solution components and services, enhancing customer benefits and the overall value of wind energy.
An important milestone for the energy transition: On 21 August 2025, ENERCON and CPC Germania GmbH & Co. KG signed the contract for the delivery and construction of 15 x E-175 EP5 E2 wind energy converters.
